MSP500-Speed limiter tracker

MSP500 is a special tracking terminal with GNSS/GSM/Bluetooth connectivity, internal GNSS/GSM antennas, RS232 interface for ESC/POS printer support and internal Ni-Mh battery. Moreover, device contains integrated buzzer and relay for a speed limiting functionality based on a fuel pump power supply switching.

Open

Open

• Based on FMB platform with useful features

• 2G connectivity ( suitable for Europe, Africa, America, Asia..)

• Waterproof (IP65)

• Speed limiter functionality, configurable via the configurator.

Benefits:

• RS232 for LLS fuel sensor or post printer

• Bluetooth 4.0

• Buzzer-notify the driver when some condition are gathering

• Internal relay

• Voltage (10-30 v)

• 400 mAh internal battery-up to 2 days

• Pulsecounter-Speedometer

• You can configure more up to 50 geozones with MSP500

Opportunities

By controlling speed:

• Avoid accidents

• Take care of drivers

• Control fuel consumption

• Fight against over speeding

Connection of the speed limiter

There are three possible connections for MSP500.

• Electronic Throttle controller

• Fuel pump (Note: Using this method, engine can stop running once limit is engaged)

• Solenoid valve (Note: Solenoid valve should connect to the hose between injector pump and fuel filter)

For more information contact the support of Mirifica.

FAQ

Q: Can we use it as Gps trackers unit as well?

A: Yes, it a tracker unit that could be used as speed unit too.

--

Q: Do the device use immobilizer scenario?

A: No, the device does not take in charge 1-Wire connection.

--

Q: Is it possible to manage relay via SMS?

A: Yes, it is possible to control relay DOUT1 with SMS or GPRS command.

--

Q: Can we add others relays to the unit?

A: Yes, it is possible to add others relays.