MSP500-Speed limiter tracker

Owned by Franck Arthur Kapche Simo
Last updated: May 06, 2020
2 min read

MSP500 is a special tracking terminal with GNSS/GSM/Bluetooth connectivity, internal GNSS/GSM antennas, RS232 interface for ESC/POS printer support and internal Ni-Mh battery. Moreover, device contains integrated buzzer and relay for a speed limiting functionality based on a fuel pump power supply switching.

 

  • Based on FMB platform with useful features

  • 2G connectivity ( suitable for Europe, Africa, America, Asia..)

  • Waterproof (IP65)

  • Speed limiter functionality, configurable via the configurator.

Benefits:

  • RS232 for LLS fuel sensor or post printer

  • Bluetooth 4.0

  • Buzzer-notify the driver when some condition are gathering

  • Internal relay

  • Voltage (10-30 v)

  • 400 mAh internal battery-up to 2 days

  • Pulsecounter-Speedometer

  • You can configure more up to 50 geozones with MSP500

Opportunities

By controlling speed:

  • Avoid accidents

  • Take care of drivers

  • Control fuel consumption

  • Fight against over speeding

Connection of the speed limiter

There are three possible connections for MSP500.

  • Electronic Throttle controller

  • Fuel pump (Note: Using this method, engine can stop running once limit is engaged)

  • Solenoid valve (Note: Solenoid valve should connect to the hose between injector pump and fuel filter)

For more information contact the support of Mirifica.

FAQ

Q: Can we use it as Gps trackers unit as well?

A: Yes, it a tracker unit that could be used as speed unit too.

--

Q: Do the device use immobilizer scenario?

A: No, the device does not take in charge 1-Wire connection.

--

Q: Is it possible to manage relay via SMS?

A: Yes, it is possible to control relay DOUT1 with SMS or GPRS command.

--

Q: Can we add others relays to the unit?

A: Yes, it is possible to add others relays.