FMB140

Owned by Franck Arthur Kapche Simo
Last updated: Jul 17, 2020 by Fabio De Riccardis
2 min read

FMB140 is an ADVANCED GSM/GNSS/Bluetooth tracker with integrated CAN data processor. It is compact 2 in 1 solution: GPS tracker and CAN adapter inside! Device allows to read CAN data from a wide range of various vehicles, including light & electric vehicles, trucks, buses and special machinery. Depending on exact software version FMB140 can be used in advanced applications as heavy logistics, delivery services, utility transport. Two options available to fulfill any business demands:

  1. LV-CAN200 option – base software version with LV-CAN200 parameters, including fuel level, consumption, odometer, CAN speed, pedal position, Supported vehicle types: light vehicles, trucks, buses.

  2. ALL-CAN300 option* – advanced software version allows to read more parameters than default version. Available additional parameters include AdBlue level, engine lifetime, airbag. Supported vehicle types: light vehicles, trucks, buses + electric vehicles, agriculture, construction, forest, utility & special machineries.

ALLCAN_ACTIV

Base FMB140 (embedding LV-CAN200)
can be updated remotely to
Advanced FMB140 (embedding ALL-CAN300)
through FOTA WEB only. Requirements

  • purchase ALLCAN_ACTIV license

  • send to mirifica:

    • serial number or IMEI of the target devices

    • mobile number of the target devices

  • confirm to mirifica that target devices is:

    • actively registered in FOTA WEB

    • reachable through a data connection (VPN is not supported)

Teltonika will queue firmware for upgrading the target devices. The upgrade may be anticipated on demand by sending SMS command “ web_connect” to target devices.

How to know if the device has been upgrade:

  • Via the sms command " lvcangetinfo" and after you could activate the ALL-CAN300 with the sms command "allcanmode".

  • In the configurator, in the tab "CAN Adapter", we can check it.

  • On FOTA WEB, via information-> the Software Date, normally the number will not be the same.

Please check the following to have more information: https://wiki.teltonika-gps.com/view/FMB140_CAN_connection,_SIMPLE-CAN_connection#FMB140_CAN_software_update_Over_The_Air

Comparison table FMB140 (LV-CAN200) vs FMB140 (ALL-CAN300)

 

Before upgrade-FMB140 (LV-CAN200)

After upgrade-FMB140 (ALL-CAN300)

 

Before upgrade-FMB140 (LV-CAN200)

After upgrade-FMB140 (ALL-CAN300)

sms command

lvcangetinfo (Get information about connected CAN Adapter)

lvcanmode (Turn on LV-CAN200 mode)

lvcangetinfo (Get information about connected CAN Adapter)

allcanmode (Turn on ALL-CAN300 mode)

Configurator

default LV-CAN200 can bus data

CAN-Adapter-> autodetect will give new can bus features

  1. AdBlue level (Dashboard)

  2. Webasto

  3. SIMPLE TACHO

  4. Seat belt status (Driver's seat belt, Passenger's set belt)

  5. Check engine, Lights failure, Low tire pressure... statuses

  6. AND MORE...

 

Device Overview

FMB140 is a major improvement for telematics with easier installation and flexibility to choose proper set of features without a change of hardware.

Teltonika FMB140

More information, how to install FMB140 with vehicle the client can find here: https://wiki.teltonika.lt/view/FMB140_CAN_connection,_SIMPLE-CAN_connection

 

FAQ

Q: How to update the LVCAN200 inside the base software version?

A: The only way to update LVCAN module (which is integrated into FMB140) is over the air (FOTA WEB)