TMT250 scenario: find lost device

Owned by François Éloge - Zebaze Keubou (Unlicensed)
Last updated: Sept 18, 2019 by Fabio De Riccardis
1 min read

If the TMT is lost in a known space, the following steps can be taken to recover it:

  • First of all check if your device is turned on by sending SMS: " getver"

  • If device is still turned On, then you can send an SMS to enable "I Am Alive" vibration indication.
    You should send this SMS command: " setparam 12690:1;12693:1;12691:1;12695:10000"

  • Vibration period depends from other parameters:

    • from Period time,

    • Off time

    • and repeat period

You can configure the activation and deactivation times as well as the repetition in the SMS command below:
" setparam 12694:0;12695:1000;12696:1000;12696:1000;12696:1000;12697:0”

  • In order to disable this vibration, use SMS command below:
    " setparam 12690:1"