MSP500 is a special tracking terminal with GNSS/GSM/Bluetooth connectivity, internal GNSS/GSM antennas, RS232 interface for ESC/POS printer support and internal Ni-Mh battery. Moreover, device contains integrated buzzer and relay for a speed limiting functionality based on a fuel pump power supply switching.
Based on FMB platform with useful features
2G connectivity ( suitable for Europe, Africa, America, Asia..)
Waterproof (IP65)
Speed limiter functionality, configurable via the configurator.
Benefits:
RS232 for LLS fuel sensor or post printer
Bluetooth 4.0
Buzzer-notify the driver when some condition are gathering
Internal relay
Voltage (10-30 v)
400 mAh internal battery-up to 2 days
Pulsecounter-Speedometer
You can configure more up to 50 geozones with MSP500
Opportunities
By controlling speed:
Avoid accidents
Take care of drivers
Control fuel consumption
Fight against over speeding
Connection of the speed limiter
There are three possible connections for MSP500.
Electronic Throttle controller
Fuel pump (Note: Using this method, engine can stop running once limit is engaged)
Solenoid valve (Note: Solenoid valve should connect to the hose between injector pump and fuel filter)
For more information contact the support of Mirifica.
FAQ
Q: Can we use it as Gps trackers unit as well?
A: Yes, it a tracker unit that could be used as speed unit too.
--
Q: Do the device use immobilizer scenario?
A: No, the device does not take in charge 1-Wire connection.
--
Q: Is it possible to manage relay via SMS?
A: Yes, it is possible to control relay DOUT1 with SMS or GPRS command.
--
Q: Can we add others relays to the unit?
A: Yes, it is possible to add others relays.
Add Comment