MSP500 is a special tracking terminal with GNSS/GSM/Bluetooth connectivity, internal GNSS/GSM antennas, RS232 interface for ESC/POS printer support and internal Ni-Mh battery. Moreover, device contains integrated buzzer and relay for a speed limiting functionality based on a fuel pump power supply switching.
Based on FMB platform with useful features
2G connectivity ( suitable for Europe, Africa, America, Asia..)
Waterproof (IP65)
Speed limiter functionality, configurable via the configurator.
RS232 for LLS fuel sensor or post printer
Bluetooth 4.0
Buzzer-notify the driver when some condition are gathering
Internal relay
Voltage (10-30 v)
400 mAh internal battery-up to 2 days
Pulsecounter-Speedometer
You can configure more up to 50 geozones with MSP500
By controlling speed:
Avoid accidents
Take care of drivers
Control fuel consumption
Fight against over speeding
There are three possible connections for MSP500.
Electronic Throttle controller
Fuel pump (Note: Using this method, engine can stop running once limit is engaged)
Solenoid valve (Note: Solenoid valve should connect to the hose between injector pump and fuel filter)
For more information contact the support of Mirifica.
FAQ
Q: Can we use it as Gps trackers unit as well?
A: Yes, it a tracker unit that could be used as speed unit too.
--
Q: Do the device use immobilizer scenario?
A: No, the device does not take in charge 1-Wire connection.
--
Q: Is it possible to manage relay via SMS?
A: Yes, it is possible to control relay DOUT1 with SMS or GPRS command.
--
Q: Can we add others relays to the unit?
A: Yes, it is possible to add others relays.