CAN adapters

Teltonika ALL-CAN300
- SWDate < 2018-01-01 => 3 or 4 digits, not upgradable to 5 digits;
- SWDate >= 2018-01-01 => 5 digits;
Teltonika CAN-CONTROL
Teltonika LV-CAN200
- SWDate < 2018-01-01 => 3 or 4 digits, not upgradable to 5 digits;
- SWDate >= 2018-01-01 => 5 digits;
Teltonika SIMPLE-CAN

connection to a vehicle CAN bus

If you need support for connecting a Teltonika FM device to a vehicle CAN bus

or through

please send the following information to
support@mirifica EU
for each vehicle as far as possible and reasonable:

Tetlonika FM
- model
- firmware version
Tetlonika CAN adapter
- model
- firmware version
vehicle
- manufacturer
- model
- manufacturing year
- VIN (vehicle identification number)
application goal

Teltonika devices cannot write to CAN bus for safety reasons.

Nevertheless, CAN-CONTROL can only send some request commands to CAN bus such as:

lvcanopenalldoors = Open [unlock] all doors
lvcanclosealldoors = Close [lock] all doors
lvcanopentrunk =Open [unlock] trunk
lvcanturninglights = One flash of all turn lights ordered trough accidental / blinking turn light switch

manufacturing date: from	manufacturing date: to	HW revision	code length: min.	code length: default	code length: max.	screw position
	2017-08-31	P145	3	3	4	center
2017-09-01	2017-12-31	P145	3	4	4	center
2018-01-01		U245	4	4, 5	5	displaced 0,5 cm towards connector

Useful SMS command: lvcangetinfo (get information about connected CAN Adapter).

code length: from	code length: to	pattern: before	pattern: after
3	4	xyz	1xyz
4	5	wxyz	1wxyz

You can update all HW revisions to the latest firmware. The firmware will automatically set the maxim code length supported by a given HW revision.

Teltonika LV-BOOT20 updates firmware of the following CAN adapters:

Update process:

start LV-CAN200 Updater;
enter standard user name and standard password to log in;
LV-CAN200 Updater will connect to the Internet and updated the CAN adapter to the latest version automatically.