It is an ultra-small plug and play device dedicated to OBD applications of next generation. The main feature of FMB003 is its possibility to read OEM parameters (PIDs) via OBD port. With this device, you will be able to read Real Odometer and Real Fuel Level data.
It can read the OEM parameter from the supported vehicles.
OEM Parameters AVL ID:
389 OBD OEM total mileage
390 OBD OEM fuel level
Note: Please note that Codec 8 Extended must be enabled to receive these parameters.
How it functions:
The device will start reading OEM parameters after connecting with the Fota web server while the ignition is ON. When connecting to Fota device it will download the correct OBD configuration according to the VIN of the vehicle, so the VIN number should be visible for FMB003. Please check if the device could read the VIN number with obdinfo command.
https://wiki.teltonika-gps.com/view/FMB_obdinfo
If the VIN number is not available, please enter it manually in the configurator (OBDII->OBD VIN Settings->VIN Source->Manual->put VIN number).
AVL 199 Trip odometer is an odometer based on GNSS readings for the Trip scenario:
https://wiki.teltonika-gps.com/view/FMB003_Trip/Odometer_settings
AVL 16 Total Odometer - Odometer based on GNSS readings or OBD depending on configuration (Trip->Odometer->Calculation Source)
When OBD is selected as the calculation source, the device will count the distance based on the MIL On distance traveled or the distance from code clearing, if it is available.
Add Comment