CAN adapters

Teltonika CAN adapters

• Teltonika ALL-CAN300
  • SWDate < 2018-01-01 => 3 or 4 digits, not upgradable to 5 digits;
  • SWDate >= 2018-01-01 => 5 digits;
• Teltonika CAN-CONTROL
• Teltonika LV-CAN200
  • SWDate < 2018-01-01 => 3 or 4 digits, not upgradable to 5 digits;
  • SWDate >= 2018-01-01 => 5 digits;
• Teltonika SIMPLE-CAN

connection to a vehicle CAN bus

If you need support for connecting a Teltonika FM device to a vehicle CAN bus

• directly (e.g. Teltonika FM6xxx or Teltonika FMB6xx devices)

or through

• Teltonika LV-CAN200
• Teltonika ALL-CAN300
• Teltonika CAN-CONTROL

please send the following information to
  support@mirifica EU
for each vehicle as far as possible and reasonable:

• Tetlonika FM
  • model
  • firmware version
• Tetlonika CAN adapter
  
  • model
  • firmware version
• vehicle
  • manufacturer
  • model
  • manufacturing year
  • VIN (vehicle identification number)
• application goal

FM manual CAN

• FM6300 manual CAN
• FM6320 manual CAN
• FMB630 manual CAN
• FMB640 manual CAN missing as of 2019-03

PGN: Parameter Group Number (SAE J1939)

useful resources

• Troubleshooting LV-CAN200, ALL-CAN300, CAN-CONTROL
• How to capture CAN adapter log from FMB1YX?

writing to CAN bus

Teltonika devices cannot write to CAN bus for safety reasons.

Nevertheless, CAN-CONTROL can only send some request commands to CAN bus such as:

• lvcanopenalldoors = Open [unlock] all doors

• lvcanclosealldoors = Close [lock] all doors

• lvcanopentrunk =Open [unlock] trunk

• lvcanturninglights = One flash of all turn lights ordered trough accidental / blinking turn light switch

ALL-CAN300, LV-CAN200

manufacturing date: from	manufacturing date: to	HW revision	code length: min.	code length: default	code length: max.	screw position
	2017-08-31	LV-CAN200: P145 ALL-CAN300;	3	3	4	center
2017-09-01	2017-12-31	LV-CAN200: P145 ALL-CAN300;	3	4	4	center
2018-01-01		LV-CAN200: U245 ALL-CAN300;	4	4, 5	5	displaced 0,5 cm towards connector

Useful SMS command: lvcangetinfo (get information about connected CAN Adapter).

code migration scheme

You can update all HW revisions to the latest firmware. The firmware will automatically set the maxim code length supported by a given HW revision.

LV-BOOT20

Teltonika LV-BOOT20 updates firmware of the following CAN adapters:

• ALL-CAN300, LV-CAN200: connector cable, 10 pins
• CAN-CONTROL: connector cable, 8  / 11   pins

Connections:

1. windows computer
2. Teltonika updater/bootloader application (request from us)
3. USB port
4. USB cable
5. LV-BOOT20 (buy from us)
6. connector cable
7. Teltonika CAN adapter to be updated

Update process:

• start LV-CAN200 Updater;
• enter standard user name and standard password to log in;
• LV-CAN200 Updater will connect to the Internet and updated the CAN adapter to the latest version automatically.