...
FMB120 can perform tasks on remote objects, such as monitoring engine status, controlling truck’s door etc.
DIfference Table
Features | FMB120 | FMB130 |
|---|---|---|
DOUT | 2 | 3 |
Negative Input | - | ✓(Digital Input 2) |
Impulse Inputs | ✓(Digital Input 1, Digital Input 2) | |
1-Wire | ||
Dimension | 65 x 56.6 x 18.9 mm | 65 x 56.6 x 20.6 mm |
Wiring Scheme comparison
...
2x6 socket |
Pin |
Common | FMB120 |
FMB130 only
1
2
3
FMB130 | |||
1 | VCC (10-30) V DC (+) Power supply (+10 -30 V DC). | ||
2 |
| AIN 1 Analog input, channel 1. Input range: 0-30 V DC. | DOUT 3 Digital output, channel 3. Open collector output. Max. 3,3 A DC. |
3 | AIN 2 / DIN 3 Analog input, channel 2. Input range: 0-30 V DC / Digital input, channel 3. | ||
4 |
| DIN 2 Digital input, channel 2. | DIN 2-N/AIN1
|
5 | DIN 1 Digital input, channel 1. | ||
6 | INPUT 6 TX EXT (LVCAN – TX). | ||
7 | GND (-) Ground. | ||
8 | DOUT 1 Digital output, channel 1. Open collector output. Max. 3,3 A DC | ||
9 | DOUT 2 Digital output, channel 2. Open collector output. Max. 3,3 A DC. | ||
10 | 1WIRE POWER +3,8 V output for 1–Wire devices. | ||
11 | 1WIRE DATA Data for 1–Wire devices. | ||
12 | INPUT 5 RX EXT (LVCAN - RX). |
FMB120 FMB130
...
FAQ
Q: How does this negative input work?
...
A: Negative pulses can be configured in the system window in the mass detection input mode. For this, only one of DIN2/AIN1 wire can be used. If you use another DIN or AIN input, you only need to configure the I/O tab by activating it.
--
Q: How to Configure configure DIN/AIN for flexible remote monitoring and control?
...