...
Features | FMB120 | FMB130 |
|---|---|---|
DOUT | 2 | 3 |
Negative Input | - | ✓(Digital Input 2) |
Impulse Inputs | ✓(Digital Input 1, Digital Input 2) | |
1-Wire | ||
Dimension | 65 x 56.6 x 18.9 mm | 65 x 56.6 x 20.6 mm |
Wiring Scheme comparison
...
2x6 socket | pinoutPin | commonCommon | FMB120 | onlyFMB130 only | 1 | 2 | 3 | FMB130 | |
|---|---|---|---|---|---|---|---|---|---|
1 | Yes | VCC (10-30)V DC (+), Power supply (+10-30 V DC). | VCC (10-30)V DC (+), Power supply (+10-30 V DC). | ||||||
2 | No | AIN 1 Analog input, channel 1. Input range: 0-30 V DC. | DOUT 3 Digital output, channel 3. Open collector output. Max. 3,3 A DC. | ||||||
3 | Yes | AIN 2 / DIN 3 Analog input, channel 2. Input range: 0-30 V DC / Digital input, channel 3. | AIN 2 / DIN 3 Analog input, channel 2. Input range: 0-30 V DC / Digital input, channel 3. | ||||||
4 | No | DIN 2 Digital input, channel 2. | DIN 2-N/AIN1 Digital input, channel 2, Negative input, Analog input, channel 1, Input range: 0-30 V DC. | ||||||
5 | Yes | DIN 1 Digital input, channel 1. | DIN 1 Digital input, channel 1. | ||||||
6 | Yes | INPUT 6 TX EXT (LVCAN – TX). | INPUT 6 TX EXT (LVCAN – TX). | ||||||
7 | Yes | GND (-) Ground. | GND (-) Ground. | ||||||
8 | Yes | DOUT 1 Digital output, channel 1. Open collector output. Max. 3,3 A DC. | DOUT 1 Digital output, channel 1. Open collector output. Max. 3,3 A DC. | ||||||
9 | Yes | DOUT 2 Digital output, channel 2. Open collector output. Max. 3,3 A DC. | DOUT 2 Digital output, channel 2. Open collector output. Max. 3,3 A DC. | ||||||
10 | Yes | 1WIRE POWER +3,8 V output for 1–Wire devices. | 1WIRE POWER +3,8 V output for 1–Wire devices. | ||||||
11 | Yes | 1WIRE DATA Data for 1–Wire devices. | 1WIRE DATA Data for 1–Wire devices. | ||||||
12 | Yes | INPUT 5 RX EXT (LVCAN - RX). | INPUT 5 RX EXT (LVCAN - RX). |
FMB120 FMB130
...
FAQ
Q: How does this negative input work?
...
A: Negative pulses can be configured in the system window in the mass detection input mode. For this, only one of DIN2/AIN1 wire can be used. If you use another DIN or AIN input, you only need to configure the I/O tab by activating it.
--
Q: How to Configure configure DIN/AIN for flexible remote monitoring and control?
...