CAN adapters
Teltonika CAN adapters
- Teltonika ALL-CAN300
- SWDate < 2018-01-01 => 3 or 4 digits, not upgradable to 5 digits;
- SWDate >= 2018-01-01 => 5 digits;
- Teltonika CAN-CONTROL
- Teltonika LV-CAN200
- SWDate < 2018-01-01 => 3 or 4 digits, not upgradable to 5 digits;
- SWDate >= 2018-01-01 => 5 digits;
- Teltonika SIMPLE-CAN
...
Teltonika devices cannot write to CAN bus for safety reasons.
Nevertheless, CAN CAN-CONTROL can only send some request commands to CAN bus such as:
lvcanopenalldoors = Open [unlock] all doors
lvcanclosealldoors = Close [lock] all doors
lvcanopentrunk =Open [unlock] trunk
lvcanturninglights = One flash of all turn lights ordered trough accidental / blinking turn light switch
References:
- https://wiki.teltonika.lt/view/CAN-CONTROL
- https://wiki.teltonika.lt/view/FMB130_CAN_adapters
- https://wiki.teltonika.lt/view/FMB640_CAN_adapters (incomplete as of 2019-03)
ALL-CAN300, LV-CAN200
| manufacturing date: from | manufacturing date: to | HW revision | digits: | digits: factory default | digits: max. length | screw position |
|---|---|---|---|---|---|---|
| 2017-08-31 | P145 | 3 | 3 | 4 | center | |
| 2017-09-01 | 2017-12-31 | P145 | 3 | 4 | 4 | center |
| 2018-01-01 | U245 |  | 5 | | displaced 0,5 cm towards connector |
Useful SMS command: lvcangetinfo (Get information about connected CAN Adapter).
LV-BOOT20
Teltonika LV-BOOT20 updates firmware of the following CAN adapters:
- ALL-CAN300, LV-CAN200: connector cable, ... 10 pins
- CAN-CONTROL: connector cable, ... 8 / 11 pins
Update process:
- start LV-CAN200 Updater;
- enter standard user name and standard password to log in;
- LV-CAN200 Updater will connect to the Internet and updated the CAN adapter to the latest version automatically.