Versions Compared

Old Version 7

changes.mady.by.user Franck Arthur Kapche Simo

Saved on

compared with

New Version Current

changes.mady.by.user Franck Arthur Kapche Simo

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • SMS command that help to receive via sms a link to Google Maps or Openstreetmap directly with the GPS coordinates built to offer the recipient a quick way to view the real position:
    ”In Features → Alarm → SMS text field, simply enter the following commands: Alarm %11711, Coordinates link %gmap

    Now after pressing alarm button, device will send SMS text message with Alarm value and a coordinates link to google maps.

    We have created instructions how to compose custom SMS text messages:

    https://wiki.teltonika-mobility.com/view/How_to_compose_an_SMS_text_according_to_your_needs “

  • Default password:
    If you want to set login and password for SMS messages, so that login and password would be required for anyone trying to interact with device over SMS messages it would be like this:  "  setparam 3003:<Log in Value>;3004:<Your password>;"

    Please note there are two blank spaces before setparam, because as of now you probably do not have set login and password. Once you have set it such command would look something like this: "<login><password>setparam 3003:<Log in Value>;3004:<Your password>;"

  • Sms for set home/stop/Min period:

    <SMSlogin><space><SMSpassword><space>setparam 10000:3600

    will set for On Stop / Home / Min Period = 3600

  • SMS command for “I am Alive”: (if no login and password set for SMS commands, then place two space symbols before entering the command)

    setparam 14190:1;14192:0;14193:0;14191:1;14194:360000;14195:500;14196:0;14197:0;

    14190 – Indication Scenario: 0 - Disable/ 1 - Enable

    14192 – LED: 0 - Red Led

    14193 – Additional Indication: 0 - Vibro off/ 1 - Vibro on

    14191 – Enable in Sleep Mode: 0 - Disable/ 1 - Enable

    14194 – Period: 0 - minimum/ 360000 - maximum

    14195 – On (How long LED and VIBRO should be on): 0 - minimum / 10000 - maximum

    14196 – Off (How long LED and VIBRO should be off): 0 - minimum / 10000 - maximum

    14197 – Repeat count of On-Off cycle 0 - minimum / 100 - maximum

...


FAQ:

Q: can the TMT250 be configured so that it ignores all external buttons and just does GPS tracking without anybody able to switch it on or off externally (without unscrewing the container)?

A: In order to configure TMT250 buttons you need to open up the Configurator and head over to the Keyboard section.

There you are able to set the actions for all of the configurable buttons. In order to disable the button actions you have to set them as "None".

You can also disable the Power Button functionality to turn the device OFF with the "Power Off Settings" that are found on the same page. Keep in mind, disabling the power ON functionality of the power button is not possible.

The tracking of the device would start as soon as the device is turned on and the needed services load up (GNSS and GSM).