Priority

This field allows to enable I/O elements and setting them a priority so they are added to the data packet, which is sent to the server. By default 12 I/O elements with Low priority are enabled: Ignition, Movement, Data Mode, GSM Signal, Sleep Mode, GNSS Status, GNSS PDOP, GNSS HDOP, External Voltage, Speed, Battery Current, Battery Voltage. All records made by FMBXXX are regular, and regular packets are sent as low priority records.

Priority level (AVL packet priority) can be:

- None Priority

Module doesn't make additional record.

- Low Priority

Module makes an additional record with an indication that the event was caused by an I/O element change (depending on Operands configuration).

- High Priority

Module makes an additional record with High priority flag and sends event packet immediately to the server using GPRS.

- Panic Priority

This priority triggers same actions as High priority, but if GPRS fails, it sends an AVL packet using SMS data if SMS data sending is enabled and the number is provided in SMS/Call Settings.

Note: They will be additional records between regular ones sent immediately after the event.

FAQ

Q: when can we set Panic Priority?

A: When you want to know about the event immediately, you can use Panic and additionally send sms.