desktop application

.... getDDD

WEB Tacho

ddd.teltonika.lt  or  IP: 212.59.13.226

company management > email address

https://wiki.teltonika.lt/view/WEB_Tacho_Company_Management

Email > Enter recipient's email address (Mandatory): you get notifications to this email address about your licenses (when expire date is coming) and about units (when you are closing to unit limit).

user management > email address

https://wiki.teltonika.lt/view/WEB_Tacho_User_management

Email > Enter user email address (Mandatory): you can configure in "user settings" for each user to receive e-mail messages for failed schedules and Receive e-mail messages with ddd files attached on schedule completion.

FAQ

Q: After installing Remote Smart Card reader software for 1.0.0 to 3.0.10, company card is no longer connected to the Tacho WEB?

R: Check firewall settings and make sure that PORTS: 29000-29003 are accessible from the inside of the network ( Also when working with Remote Smart Card reader software, it's better to ask for software logs, which are located: C:\Program Files (x86)\Teltonika\SCard Reader\Service\Logs)

Digital tachograph monitoring solution

There are two ways to implement software:

• You can use special Web Tacho application from Teltonika
  https://ddd.teltonika.lt/Account/Login?ReturnUrl=%2f
• Develop your own software.

In case you choose latter scenario, you will be provided with special communication protocol, which you will use when developing software solution. On the other hand, in case you choose Teltonika Web Tacho solution, you are ready to go.

• Devices with DDD download and tacho online functionality:
  FM6300
  FMB640
  FMC640
  FMM640

https://wiki.teltonika.lt/view/Digital_tachograph_monitoring_and_data_reports

Connection and configuration of the tachograph for the FMB640

Teltonika Tachograph Solution is a big forward leap in remote tachograph data files download. Solution is easily manageable and does not require any complex software installation. Everything is accessible via web page. Now you can download tachograph files from any place and from any PC via internet access. Read more...https://wiki.teltonika.lt/view/FMB640_and_Tachograph_Solution

• Supported devices are:

Siemens VDO Digital Tachograph - DTCO 1381 (release 1.3a, 1.4 or later) and Stoneridge Tachograph - SE5000 (release 7.1 or later).

To use tachograph, devices must have:

• Tachograph live data (K-line) - data from digital tachograph
• Remote tachograph file download
• Teltonika Web Tacho application or other software to download files and monitor data 
• FMS CAN Data (J1939)

FAQ

•  When  tachocheck respond  with 000 that means:  Either  the vehicles Ignition must be either OFF or CAN2 wires are not connected to the tachograph (instructions for connection: https://wiki.teltonika.lt/view/FMB640_and_Tachograph_Solution)