Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »


Standards

  • SAE J1939-13: round diagnostic connector may support OBD-II data on heavy duty vehicles for sales in the USA after 2010.
  • SAE J1962: hardware interface (connector, female = receptacle, 16-pin (2x8), D-shaped)
    • type A: 12 V vehicles (full middle groove)
    • type B: 24 V vehicles (interrupted middle groove)
    • common with passenger cars (11 bit headers)
    • used by some heavy duty trucks in North America (29 bit CAN identifiers)
  • SAE J1979: defines many OBD-II PID's.
  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.