Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 42 Next »

FM series

  • FMA: 2G (discontinued 2018)
  • FMB: 2G + Bluetooth
  • FMU: 3G
  • FMM: LTE M1
  • FMC: LTE

Current Configurator and firmware versions

On this page

https://wiki.teltonika.lt/view/Teltonika_Configurator_versions

you find:

  • current configurator version;
  • current configurator file;
  • current firmware version.

Please contact
   support@mirifica EU
for current firmware file download.

Release versions:

Download .net for Windows

Common FMB resources

FM Parameters

Not all FM parameters are documented by Teltonika all the time. Some parameters may be present only in your latest Teltonika Configurator at the beginning.

FMB AVL ID

https://wiki.teltonika-gps.com/view/Teltonika_Data_Sending_Protocols

  • No. = old AVL ID (dismissed)
  • Property ID = new AVL ID

All of the AVL ID's that are above 255 need to use Codec 8 Extended instead of Codec 8. The reason being, that Codec 8 AVL ID's have 1 Byte (Maximum value 255), while Codec 8 Extended has 2 Bytes for AVL ID's (Maximum value 65535). Also Codec 8 Extended can have variable size I/O elements.

Record and packet size

An AVL record contains basic AVL data. An AVL packet conveys one or more AVL records. An AVL packet is sent trough the cellular network as a cellular packet.

AVL record size:

  • minimum: 45 bytes (all IO elements disabled);

  • maximum: 783 bytes.

AVL packet size:

  • minimum: 1 record;
  • maximum: 1 kbyte (for FMB devices).

Most cellular network operators have a minimum billed packet size of 1 kbyte.

The cheapest way to set up the device would be to send as many records as they fit in a maximum size packet 81 kbyte).

Typical data consumption

Cellular data consumption depends on cellular network operator (tariff in home/roaming, what is charged and what is not). For example - some operators take extra fee for data session establishment; in this case, customers configure devices to hold a session open for all the time the vehicle is driving.

It also depends on how often device will send data, so configuration also matters.

Sending protocol:

  • TCP uses different amount of data (headers, confirmations etc.);
  • UDP uses about 3 times less traffic data then TCP.

So it is possible to have 2-3 Mb per month, or 10-15. All depends on your application and requirements.


How to capture remote log from FM device?


  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.