...
...
Comparison Table
Features | Blue Coin | Blue Puck |
|---|---|---|
|
...
up to 200 meters (open field) |
...
battery life time
...
Dimension
...
Weight
...
...
up to 500 meters (open field) |
|
...
Dimension (Blue Puck are more larger than Blue Coin)
...
up to 5 years | up to 20 years | |
| smaller | larger |
| lighter | heavier |
You can have more information on:
https://teltonika-gps.com/products/accessories/
BLE connection with FM devices
In the first step you need to activate your BLE sensor via NFC Application => Device Manager Mobile
Then read the instructions- Section- BLE sensors testing instructions , page 7
https://teltonika-gps.com/downloads/en/blue-coin-mag/Sensor-and-Beacon-testing-instructions-v1.2.pdf
Next
https://wiki.teltonika-gps.com/view/FMB120_Bluetooth_4.0_settings
Adding information:
Please check the link about Bluetooth 4.0: https://wiki.teltonika-gps.com/view/FMB003_Bluetooth_4.0_settings
Remember that you must activate these parameters in the device configuration => I / O section
Then, after pairing, you will receive the appropriate AVLID on your server.
Note: If the Manufacturer Data Mode is activated, You should modify it using Device Manager Mobile to change this parameter.
...
FAQ
Q: From which firmware can blue coin accessories be used?
...
A: Up to 4 Sensors at once, Up to 100 Beacons at once.
Q: where is the difference between Eventual and Periodic?
A: In Beacon list settings, configure Beacon Detection as "All" and Beacon Record as "Eventual". This will detect all surrounding Beacons and create Beacon records every 30 seconds.
Periodic mode creates an additional repeatable record (more than 30 s) - other / greater than the Update frquency
Thus, the Update Frequency settings where the minimum time is 30 seconds are important.