...

• Vacc = 25 V
• Vidle = 27.5 V
• => low voltage = 2,600 mV

Geofence using sms

Q: How to activate geofencing notifications using SMS?

A: In this case You should simply create the recipient specifying required GSM number and then while creating new Geofencing rule (or editing current rule) add as a recipient Your created recipient that uses GSM number

Time zone configuration

It is recommends to you use NITZ+NTP time synchronization, because firstly device will try to get time from NITZ (Mobile operator which you are connected) so you should have time  (GMT+1) depending where you are in the world and if the device will switch to NTP, there is (GMT+0).  

• You can configure your device NTP server which is local on your country to have a valid time and set time resync 1 hour. Device will update your device time every hour.

GPS issue

-If you have a problem with gps connection please change  the movement start delay to 10s by SMS/GPRS commands:

setparam 19001:10

.Bin file

Q: How to parse .bin file?

A: .bin file should be added to TAVL server to get records parsed.  Device should be added as object to TAVL server.