...
A: The main purpose is to connect to seat belts or to doors (open or closed) to get negative input, to know if the seat belts is attached or detached.
--
Q: What is impulse input used for?
A: The main reason is used for counting pulses to get information regarding the fuel level. Mainly for fuel impulses counting.
--
Q: How to configure impulse input?
A: To configure impulse counter, you should use DIN1/DIN2 and on this DIN, it will count impulses (max 50HZ) and send to the server. More information: https://wiki.teltonika-gps.com/view/Impulse_counter
--
Q: How to configure a digital input as negative or impulse input?
A: The digital input must be configured as ground sense for the impulse input as DIN2/AIN1, If you use DIN1 as impulse counter then you do not have to configure anything, just activate the I/O parameter of DIN1.
--
Q: How to configure digital/analogue inputs/negative input?
A: Negative pulses can be configured in the system window in the mass detection input mode. For this, only one of DIN2/AIN1 wire can be used. If you use another DIN or AIN input, you only need to configure the I/O tab by activating it.
--
Q: How to Configure DIN/AIN for flexible remote monitoring and control?
A: For AIN, you can use another AIN input and for DIN, There are also 3 DIN inputs.
--
Q: How to deal with flexible inputs configuration?
A: It detects automatically if AIN or DIN is used.