...
Note: Low priority events are saved / sent according to the Data Acquisition settings when the vehicle is On Stop / Moving.
You can disable all I/O 12 - default.- if you set them NONE in the configurator ,You will only receive information from GNSS.
- High Priority
Module makes an additional record with High priority flag and sends event packet immediately to the server using GPRS.
...
By default, 12 low priority I / O elements are sent: ignition, motion, data mode, GSM signal, sleep mode, GNSS status, GNSS PDOP, GNSS HDOP, external voltage, speed, battery current, battery voltage - even if set to NONE (Those 12 default I / O are regular records sent as low priority. They cannot be excluded from the packet)in low priority.
you can disable all I/O 12 - default.- if you set them NONE Priority in the configurator ,You will only receive information from GNSS.
When a high-priority event occurs. An additional record with High priority flag is generated. The packet is sent immediately so you will immediately receive 1 additional record + default 12 I / O + other priority if the low priority is activated on other I/O events.
It is possible to sort the record settings from the most recent (newest) or oldest in the configurator before sending them to the server
...
FAQ
Q: when can we set Panic Priority?
...