Introduction
This advantageous indoor positioning system for the location of people and short-range objects is suitable for many industrial applications such as the safety of isolated workers, vehicle access control or the location of logistics equipment in a warehouse.
...
To optimize communication, in configuration mainly should be enabled CODEC 8 Extended and we would recommend to use maximum signal strenght strength of BT from device side too. In beacon list you can use filter for them. Then only those beacons which is filtrated will be found in that building.Functioning
Operation
Beacons (BLE ID TAGS) transmit signal which devices is catching them and getting information:
First half byte – current data part
Second half byte – total number of data parts
Bitwise parameter, specify BLE beacon type and parameters
(signifies if specific data is present for certain beacon)
Bit 0 – signal strength 0/1
Bit 1 – Battery Voltage 0/1
Bit 2 – Temperature 0/1
Bit 3 – Reserved
Bit 4 – Reserved
Bit 5 – BLE beacon type 0/1
Bit 6 – ReservedBit 7 – Reserved (eddystone/ibeacon)
iBeacon – 20B (UUDI, major, minor)
Eddystone – 16B
(Namespace, Instance ID)
...
https://teltonika-gps.com/downloads/en/blue-coin-id/Sensor-and-Beacon-testing-instructions-v1.2.pdf