...
ubus call ioman.gpio.dout1 status
--
Q: How to implement GPS function and NTP in a Teltonika Router to allow clock synchronization area
A:
If you would only enable GPS and GPS time synchronization (Services > NTP > General), only the router would get GPS time without requiring connecting to any Public NTP server, therefore having NTP client disabled (Services > NTP > NTP > NTP Client).
Furthermore, if you wish to synchronize this GPS time with your instruments, you would need to set up your RUTX14 as an NTP server.
In order to enable the NTP server, navigate to Services > NTP > NTP > NTP server.
After RUTX14 is set up as an NTP server, you should define the router's LAN IP address on your instruments.
Note: Please make sure that your GPS antenna is properly connected and has a clear view of the sky in order for it to function accurately.
Here are the summarised steps:
Navigate to Services > GPS > General > General configuration and enable GPS;
Navigate to Services > NTP > General and enable GPS synchronization;
Navigate to Services > NTP > NTP. Disable NTP Client and Enable the NTP server;
Set the router's LAN IP address as an NTP server in the configuration of your instrument